- Overview
- Product Description
- Detailed Photos
- Product Parameters
- Maintenance Instruction
- Packaging & Shipping
- Company Profile
- FAQ
Basic Info.
Packaging & Delivery
Product Description
Galin K1-C Blue Laboratory Portable Manual Powder Coating Machine
Special Pulse mode design for complex workpiece spraying
Four modes easy choose: Flat / Re-coat / Dead-corner / Pulse
Digital Display for Current and Voltage
Stable High Voltage and Large Output
Convenient and easy Operation
Powder charge rate: 65%-85%
| Galin K-1C Manual Powder Coating Machine The Galin K-1C manual coating equipment is exclusively intended for electrostatic coating using organic powders. It is ideally suited for manual coating of objects. Processing of the powder from powder cup(200ml or 500ml optional). Features a freely rotating and lockable head piece for more ergonomic operation and configuration. With high powder charge rate of 75%-85%, it has great coating effect and quite saving powder. With stable high voltage and large powder output, it has high effeciency and suitable for rapid spray. It can adjust voltage and current separately, perfect for all kinds of workpiece, including conners and grooves. It has 4 modes(Flat / Re-coat / Dead -corner / Pulse) perfect meets almost all spray needs. And has a special Pulse mode design for complex workpiece spraying. |
Three modes easy choose: Flat / Re-coat / Dead -corner / Pulse.
Special Pulse mode design for complex workpiece spraying.
Air can be adjusted separately:
Conveying air and dosing air has separate adjustment knobs. Able to meet most spraying needs.
Digital display makes the value more accurate and more precise, as well as more convenient.
Easy to use:
Convenient and intuitive operation interface, easy for beginners to use.
BLUE & RED
| Dimensions | Size | 300*250*280 mm |
| Weight | 7 KG | |
| Pneumatic Data | Min. input pressure | 5 bar |
| Max. input pressure | 8 bar | |
| Max. water vapor content | 1.3 g/m3 | |
| Max. oil vapor content | 0.1 mg/m3 | |
| Max.compressed air consumption | 19 Nm3/h | |
| Electrical Data | Input voltage | 110V / 220V |
| Frequency | 50-60HZ | |
| Connected load (without vibrator) | 40 VA | |
| Nominal output voltage (to the gun) | eff.10 V | |
| Nominal output current (to the gun) | max. 1.2 A | |
| Connection and output for vibrator (on Aux output) | 110/230 VAC max. 100 W | |
| Connection for rinsing function (valve) | 24 VDC max. 3 W | |
| Temperature range | 0 °C - +40 °C (+32 °F - +104 °F) | |
| Max. surface temperature | 120 °C (+248 °F) |
Daily maintenance
1. Clean the application pump
2. Clean the powder gun
3. Clean the powder hose; Please also review the section "Color change"
Weekly maintenance
1. Clean the powder hopper, application pump and powder gun.
2. Check the control unit grounding connections to the coating booth, the suspension devices of the work pieces, or the conveyor chain
If in disuse for several days
1. Separate from power mains
2. Clean the coating equipment
3. Turn off the compressed air main supply
Powder hose rinsing
If longer downtimes take place, the powder hose has to be cleaned.
| Cleaning the powder hopper 1. Disconnect the fluidizing air supply 2. Remove the suction hose 3. Remove the cover, blow out with compressed air and clean with a clean dry brush and cloth 4. Empty remaining powder into a container 5. Vacuum up the hopper and in particular the bottom 6. Clean the hopper with a cloth 7. Reassemble the powder hoppe |
| Cleaning the spray gun Daily: 1. Blow off the outside of the gun and wipe, clean etc. 2. Clean the diffuser Weekly: 3. Remove the powder hose from the connection 4. Remove the diffuser from the gun and clean it 5. Remove the spray nozzle from the gun and clean it 6. Blow out the gun from the connection in flow direction with compressed air 7. Clean the integrated gun tube with the provided gun brush 8. Blow through the gun with compressed air again 9. Clean the powder hose 10. Reassemble the gun and connect it |
Wooden box packaging has certain rigidity and stability, which can provide cushioning and shock absorption, thus ensure the safety of the machine and reduce the risk of damage during transportation.
Delivered by boat, plane or express.
Weifang Galin Powder Coating Equipment CO.,LTD which located in China Shandong province, specializes in manufacturing the coating equipment. We not only supply the high-quality coating equipment, but also the best service.
We are professional in the powder coating system for many years. Our products include powder coating machine, spray gun, powder booth, sieving machine, hopper, controll unit, HV module, PCB board, gun, injector/pump, powder hose, filter and other parts. You can find all you want for powder coating here.
Q1: What is powder coating?
Powder coating is a dry finishing process that uses finely ground particles of pigment and resin. These particles are electrostatically charged and sprayed onto a surface, where they adhere and are then cured under heat to form a hard, durable finish.
Q2: What are the advantages of powder coating over traditional liquid coatings?
Powder coating offers several advantages, including better durability, higher resistance to chipping, scratching, and fading, less environmental impact as it produces less volatile organic compounds (VOCs), and more efficient application as overspray can be recycled.
Q3: What types of surfaces can be powder coated?
Powder coating can be applied to a wide range of surfaces, including metal (such as steel, aluminum, and zinc), wood, MDF (medium-density fiberboard), and some plastics, provided they are properly pre-treated.
Q4: How long does the powder coating last?
With proper surface preparation and application, powder coating can last for 10 - 20 years or more, depending on the environment and usage conditions.
Q5: How is powder coating applied?
Powder coating is typically applied using an electrostatic spray gun. The charged powder particles are attracted to the grounded surface and form a uniform coating. After spraying, the coated item is cured in an oven at a specific temperature and time to ensure proper adhesion and curing.
Q6: Do I need to prepare the surface before powder coating?
Yes, surface preparation is crucial for a successful powder coating application. This usually involves cleaning, degreasing, and sometimes sandblasting or chemical pretreatment to remove contaminants and improve adhesion.
Q7: What kind of after-sales service do you offer?
We offer comprehensive after-sales service, including quality assurance, technical support, and assistance with any issues or concerns you may have after receiving the products. We stand behind the quality of our powder coating products and are committed to your satisfaction.
Q8: What if I receive a defective or damaged product?
If you receive a defective or damaged product, please contact us immediately. We will assess the situation and either replace the product or provide a refund, depending on the circumstances and our quality control policies.